injection moulding machine,injection molding machine manufacturer and injection moulding machine,injection molding machine supplier--China Ningbo Hautek Industries Co., Ltd.


	Drinking water treatment unit

	Water treatment unit HW series Reverse osmosis unit HRO series Household RO system
	Production line for beverage

	Production line for mineral water Production line for carbonated water Production line for juice and tea
	Filling machine

	Automatic rinsing filling capping machine for PET bottle from 200ml to 2000ml Automatic rinsing filling capping machine for 5 gallon bucket Automatic sachet filling machine
	Labeling machine

	Automatic shrinkable label inserting machine Automatic cold glue labeling machine
	Packing machine

	Shrink Tunnel Machine Automatic wrap packing and shrinking machine
	Injection molding machine

	HXF series TW series the auxiliary machine for injection machine

	Blow molding machine

	Automatic blow molding machine AL series Automatic blow molding machine CSD series Automatic blow molding machine ARA series Semi-automatic blow molding machine HG series Semi-automatic blow molding machine CSD series Semi-automatic blow molding machine ARA series Automatic blowing machine for 5 gallon PC bottle Semi-automatic blowing machine for 5 gallon bottle

	Plastic mold and product

	PET preform mold PET blowing mold Cap mold PET preform Bottle cap

	Ozone generator


	RO system for sea water


	Direct drinking water system


	Various spares

China Ningbo Hautek Industries Co., Ltd. Based on more than 10 years of professional machinery exporting experience, with rich knowledge of beverage project, bottling technology and bottle making machinery, injection moulding machine, injection molding machine, HAUTEK focuses on high and middle level international market, major in beverage production line design and manufacturing, also supply relative assorted equipment. Supported by strong technical team, we offer high quality machine, injection moulding machine, injection molding machine, good service to customers and give prompt response. We have had success in exporting and installation many beverage production lines abroad.

INJECTION MOLDING MACHINE

HXF series

Item	Name of item	Unit	HXF168	HXF218	HXF268	HXF308	HXF368	HXF468
Injection unit	Screw Diameter	mm	48	55	60	70	75	84
	Screw L/D Ratio	Ratio	18.8	18.2	18.8	18.6	19.2	19
	Shot Volume	cm3	389	499	707	989	1457	2160
	Shot Weight	g	350	449	636	900	1325	1966
	Injection Pressure	Mpa	140	144	142	157	156	141
	Injection Rate	g/s	155	179	239	324	422	535
	Plasticizing Capacity	g/s	35.7	37	49	60.8	69.5	79.8
	Screw Speed	rpm	180	180	180	180	180	160
Clamping unit	Mould Clamping Force	Kn	1680	2180	2680	3080	3680	4680
	Opening Stroke	mm	425	470	540	600	700	750
	Space Between Tie-bars	mmxmm	465x465	515x515	570x570	660?60	725x705	800x762
	Max.Mould Thickness	mm	480	530	600	660	750	820
	Min.Mould Thickness	mm	180	200	220	250	250	300
	Ejector Stroke	mm	130	130	130	160	160	200
	Ejector Force	Kn	39.6	62	62	70	110	120
	Ejector Number	N	5	5	9	13	13	13
Others	Pump Pressure	mpa	16	16	16	16	16	16
	Pump Motor Power	Kw	15	18.5	22	30	37	45
	Heating Capacity	Kw	10	11.65	14.7	17	19.65	23.65
	Machine Dimensions(LxWxH)	mxmxm	4.8x1.38x2.0	5.6x1.4x2.24	6.1x1.5x2.28	6.7x1.7x2.4	7.5x1.8x2.4	8.1x2.0x2.5
	Oil Tank Capacity	Liter	250	350	510	600	825	938
	Machine Weight	Ton	5.5	6.7	9	11	15	20

COMPONENTS OF HXF SERIES:

Component Name	Origin and details
Mold height adjustment motor	Eaton
Clamping system	Europe design linked box platen
Core pulling and inserting device	1set
Hydraulic pump	Vickers USA
Seals ("Y" oil seal)	Japan
Proportional valve	NHC Taiwan
Solenoid Vavles	Vickers USA or Rexroth Germany
Pressure Gauge	IMT Germany
Hydraulic hose	ALFAGOMMA Italy
Linear position transducer (3pcs)	NOVOTECH Germany or Gefran Italy
Computer controller	TECHMATION SA6363-1500 Taiwam
Limited switch	National Japan
Time Relay	Omron Japan
Stroke switch	Omron Japan
Main motor	Peking
AC contactor	Fuji Japan
Thermo relay	Fuji Japan
Air switch	Fuji Japan
Hydraulic motor	Intermot
Screw / cylinder	38#CrMoAl
Tie bar	40#Cr
Air ejection device	electrical and program reserved

INJECTION UNIT:

1,Precise plastification system with optimized design
2,Double-cylinder balanced glue injection
3,High pulling torque hydraulic motor preplastication drive
4,Multi-level pressure and speed injection

MOLD ADJUSTMENT UNIT:

1,Hydraulic drive gears, mother nut balanced action
2,Computer-controlled full-auto matic sensitive pressure mold adjustment
3,Precise,low pressure and fast mold adjustment design

HYDRAULIC SYSTEM:

1,High-response oil way design
2,Double proportional control of pressure and flow rate
3,Optimized combination of word famous brand hydraulic components

ELECTRIC SYSTEM:

1,Imported famous brand electric components
2,Large screen LCD
3,Dynamic monitor of machine operation
4,150-group MSF menory
5,Sensitive trouble indication and alarm function

CLAMPING UNIT:

1,Linked box die plate design
2,Resin bonded sand ductile cast ion
3,Five-fulcrum double toggle mold locking mechanism
4,Wear-proof and corrosion-Proof hard chrome plated high-strength alloy steel tie bar
5,Mechanical and electric dual protection secures safe and dependable operation and offers low-pressure mold protection
6,Linear electric transmission sensor controls the mold clamping and unclamping positions
7,Tooth and active functions

water bottling line