 |
|
CONTACT US
Add: 806, No. 9 Jiefang Road South, Ningbo, China
Tel: +86-574-87317986
Fax: +86-574-87316818
Mail: sales@china-hautek.com |
|
 |
 / Products / |
|
|
|
[water treatment, water treatment system, drinking water treatment]
As a professional water treatments, water treatment systems, drinking water treatments manufacturer, exporter, supplier and factory in China.--Ningbo Hautek Industries Co., Ltd. Based on more than 10 years of professional machinery exporting experience, with rich knowledge of beverage project, bottling technology and bottle making machinery, water treatment, water treatment system, drinking water treatment, HAUTEK focuses on high and middle level international market, major in beverage production line design and manufacturing, also supply relative assorted equipment.
|
|
| |
DRINKING WATER TREATMENT UNIT |
Water treatment unit HW series |
Working Conditions:
Raw Water: [Fe]+≤0.5ppm,[Mn]+ ≤0.1ppm
Raw Water TDS: ≤5000ppm
Raw Water Temperature: better 15~40oC
Operation: 24hours/day |
|
Supported by strong technical team, we offer high quality machine, water treatments, water treatment systems, drinking water treatments, good service to customers and give prompt response. We have had success in exporting and installation many beverage production lines abroad. |
HW series pure water treatment units that we manufacturing consist of pre-treatment part, RO device and back wash treatment part, including dosing system,sand filter, active carbon filter, micro filter, pre-UV sterilizer RO system and post UV device or Ozone device. Widely use in the field of drinking water production, bottling industry, water supplying, ultra pure water for electronic industry, desalination for saline waters and brackish waters, etc. |
Features:
- Adopted membranes with high desalination ratio and low pressure running which are from HYDRANAUTICS USA or FILMTEC USA, to reduce the running cost, and prolong the equipment life-span.
- Adopted high efficiency low noise high pressure pump to reduce the power consumption, to guarantee a stable and quiet running. With low pressure and high pressure protector switches to prevent the damage from water shortage and pipeline block.
- Conductivity monitor for continuous live monitor to guarantee the high quality permeate water. With flow meter for end-product water and concentrate water to monitor and adjust the output capacity and system permeate recovery ratio
- Equipped with Mitsubishi PLC for automatic control of auto running from raw water to end-product water and back wash process. With adjustable full automatic backwash time controller, before each time running, the RO membrane surface can be fast timing rinsed, to reduce the pollution, and prolong the membrane life-span.
- High quality stainless steel for frame, pre-treatment part, UPVC for pipe fittings, and with auto-control solenoid valve.
|
Model |
HW-250
|
HW-500
|
HW-1000
|
HW-1500
|
HW-2000
|
HW-3000
|
| Item |
Product Water Output Flow |
250 liter/hour |
500 liter/hour |
1000 liter/hour |
1500 liter/hour |
2000 liter/hour |
3000 liter/hour |
Rejections |
≥95%
|
Raw Water Input Flow |
1000 liter/hour |
2000 liter/hour |
3000 liter/hour |
3500 liter/hour |
5000 liter/hour |
Controller |
PLC(Mitsubishi)Automatic Controller |
Voltage |
220V 50/60Hz Single Phase,380V 50/60Hz 3Phase,220V 50/60Hz 3 Phase |
Total Power Consumption |
1.8KW |
2.2KW |
2.3KW |
3.0KW |
3.8KW |
5.6KW |
Dimension(LXWXH) |
250X80X140cm |
280X80X140cm |
|
Weight |
150KG |
180KG |
220KG |
280KG |
350KG |
500KG |
|
|
|
|
